Zoom
Description
Features
CPU | 1. Support for 10th Generation IntelÆ Coreô i9 processors/IntelÆ Coreô i7 processors/IntelÆ Coreô i5 processors/IntelÆ Coreô i3 processors/IntelÆ PentiumÆ processors/IntelÆ CeleronÆ processors in the LGA1200 package |
| 2. L3 cache varies with CPU | |
| (Please refer "CPU Support List" for more information.) | |
Chipset | 1. IntelÆ Z490 Express Chipset |
Memory | 1. IntelÆ Coreô i9/i7 processors: |
| Support for DDR4 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz | |
| 2. IntelÆ Coreô i5/i3/PentiumÆ/CeleronÆ processors: | |
| Support for DDR4 2666/2400/2133 MHz | |
| 3. 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory | |
| 4. Dual channel memory architecture | |
| 5. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) | |
| 6. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
| 7. Support for Extreme Memory Profile (XMP) memory modules | |
| (Please refer "Memory Support List" for more information.) | |
Onboard Graphics | Integrated Graphics Processor+IntelÆ Thunderboltô 3 Controller: |
| 1. 2 x IntelÆ Thunderboltô 3 connectors (USB Type-Cô ports), supporting DisplayPort and Thunderboltô video outputs and a maximum resolution of 5120 x 2880@60 Hz with 24 bpp | |
| * Because of the limited I/O resources of the PC architecture, the number of Thunderboltô devices that can be used is dependent on the number of the PCI Express devices being installed. (Refer to Chapter 1-7, "Back Panel Connectors," for more information.) | |
| * Support for DisplayPort 1.4 version, HDCP 2.3, and HDR. | |
| Integrated Graphics Processor-IntelÆ HD Graphics support: | |
| 1. 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz | |
| * Support for HDMI 1.4 version and HDCP 2.3. | |
| Maximum shared memory of 512 MB | |
Audio | 1. RealtekÆ ALC1220-VB codec |
| * The back panel line out jack supports DSD audio. | |
| 2. Support for DTS:XÆ Ultra | |
| 3. High Definition Audio | |
| 4. 2/4/5.1/7.1-channel | |
| 5. Support for S/PDIF Out | |
LAN | 1. 1 x IntelÆ 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)(LAN1) |
| 2. 1 x IntelÆ GbE LAN chip (1 Gbit/100 Mbit) (LAN2) | |
Wireless Communication module | IntelÆ Wi-Fi 6 AX201 |
| 1. WIFI a, b, g, n, ac with wave 2 features, ax, supporting 2.4/5 GHz Dual-Band | |
| 2. BLUETOOTH 5.1 | |
| 3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate | |
| * Actual data rate may vary depending on environment and equipment. | |
Expansion Slots | 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. | |
| 2. 1 x PCI Express x16 slot, running at x8 (PCIEX8) | |
| * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode. | |
| 3. 1 x PCI Express x16 slot, running at x4 (PCIEX4) | |
| * The PCIEX4 slot shares bandwidth with the M2P_SB connector. The PCIEX4 slot operates at up to x2 mode when a PCIe SSD is installed in the M2P_SB connector. | |
| 4. 1 x PCI Express x1 slot | |
| (All of the PCI Express slots conform to PCI Express 3.0 standard.) | |
| 5. 1 x M.2 Socket 1 connector for an IntelÆ CNVi wireless module (CNVI) | |
| Supports up to ASPM L1.2 power management protocols. | |
Multi-Graphics Technology | 1. Support for NVIDIAÆ Quad-GPU SLIô and 2-Way NVIDIAÆ SLIô technologies |
| 2. Support for AMD Quad-GPU CrossFireô and 2-Way AMD CrossFireô technologies | |
Storage Interface | 1. 1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe x4/x2 SSD support) (M2A_CPU) |
| 2. 1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe x4/x2 SSD support) (M2M_SB) | |
| 3. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe x4/x2 SSD support) (M2P_SB) | |
| 4. 6 x SATA 6Gb/s connectors | |
| 5. Support for RAID 0, RAID 1, RAID 5, and RAID 10 | |
| * Refer to "1-8 Internal Connectors," for the installation notices for the PCIEX4, M.2, SATA connectors. | |
| 6. IntelÆ Optaneô Memory Ready | |
| M.2 connectors support up to ASPM L1.2 PCIe power management protocols. | |
USB | Chipset+IntelÆ Thunderboltô 3 Controller: |
| 1. 2 x USB Type-Cô ports on the back panel, with USB 3.2 Gen 2 support | |
| Chipset: | 1. 1 x USB Type-Cô port with USB 3.2 Gen 2 support, available through the internal USB header |
| 2. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
| 3. 2 x USB 3.2 Gen 1 ports available through the internal USB header | |
| 4. 2 x USB 2.0/1.1 ports on the back panel | |
| Chipset+USB 3.2 Gen 1 Hub: | |
| 1. 4 x USB 3.2 Gen 1 ports on the back panel | |
| Chipset+USB 2.0 Hub: | |
| 1. 4 x USB 2.0/1.1 ports available through the internal USB headers | |
Internal I/O Connectors | 1. 1 x 24-pin ATX main power connector |
| 2. 1 x 8-pin ATX 12V power connector | |
| 3. 1 x 4-pin ATX 12V power connector | |
| 4. 1 x PEG power connector | |
| 5. 1 x CPU fan header | |
| 6. 1 x water cooling CPU fan header | |
| 7. 4 x system fan headers | |
| 8. 2 x system fan/water cooling pump headers | |
| 9. 2 x addressable LED strip headers | |
| 10. 2 x RGB LED strip headers | |
| 11. 3 x M.2 Socket 3 connectors | |
| 12. 6 x SATA 6Gb/s connectors | |
| 13. 1 x front panel header | |
| 14. 1 x front panel audio header | |
| 15. 1 x USB Type-Cô header, with USB 3.2 Gen 2 support | |
| 16. 1 x USB 3.2 Gen 1 header | |
| 17. 2 x USB 2.0/1.1 headers | |
| 18. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) | |
| 19. 2 x temperature sensor headers | |
| 20. 1 x Clear CMOS jumper | |
| 21. 1 x Q-Flash Plus button | |
Back Panel Connectors | 1. 1 x DisplayPort In port |
| 2. 2 x Thunderboltô 3 connectors (USB Type-Cô port, with USB 3.2 Gen 2 support) | |
| 3. 1 x HDMI port | |
| 4. 2 x SMA antenna connectors (2T2R) | |
| 5. 2 x USB 3.2 Gen 2 Type-A ports (red) | |
| 6. 4 x USB 3.2 Gen 1 ports | |
| 7. 2 x USB 2.0/1.1 ports | |
| 8. 2 x RJ-45 ports | |
| 9. 1 x optical S/PDIF Out connector | |
| 10. 5 x audio jacks | |
I/O Controller | 1. iTEÆ I/O Controller Chip |
H/W Monitoring | 1. Voltage detection |
| 2. Temperature detection | |
| 3. Fan speed detection | |
| 4. Water cooling flow rate detection | |
| 5. Overheating warning | |
| 6. Fan fail warning | |
| 7. Fan speed control | |
| * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. | |
BIOS | 1. 1 x 256 Mbit flash |
| 2. Use of licensed AMI UEFI BIOS | |
| 3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
Unique Features | 1. Support for APP Center |
| * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. | |
| @BIOS | |
| EasyTune | |
| Fast Boot | |
| Game Boost | |
| ON/OFF Charge | |
| RGB Fusion | |
| Smart Backup | |
| System Information Viewer | |
| USB DAC-UP 2 | |
| 2. Support for Q-Flash Plus | |
| 3. Support for Q-Flash | |
| 4. Support for Xpress Install | |
Bundled Software | 1. NortonÆ Internet Security (OEM version) |
| 2. cFosSpeed | |
Operating System | 1. Support for Windows 10 64-bit |
Form Factor | 1. ATX Form Factor; 30.5cm x 24.4cm |
Shipping & Return
Shipping Policy
1. General Information
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
2. Shipping Rates & Delivery Estimates
Shipping charges for your order will be calculated and displayed at checkout. Delivery delays can occasionally occur.
- Standard Shipping: 3-5 business days
3. Shipment Confirmation & Order Tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
4. Damages
Vishal Peripherals is liable for any products damaged or lost during shipping. If you received your order damaged, please take the video of unboxing and share through mail at support1@vishalperipherals.com.
5. Returns Policy
Our Return & Refund policy provides detailed information about options and procedures for returning your order. Please refer to our Returns Policy page for more information.
Wishlist
Wishlist is empty.
Compare
Shopping cart
