Description
Features
- Supports 11th and 10th Gen IntelÆ Coreô Series Processors
- Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
- Direct 12+1 Phases Digital VRM Solution with 50A DrMOS
- Shielded Memory Routing for Better Memory Overclocking
- Enlarged VRM Heatsink with Air-Flow Grooving to Increased Surface Contact
- Fast 2.5GbE LAN with Bandwidth Management
- Triple Ultra-Fast NVMe PCIe 4.0*/3.0 x4 M.2 with Thermal Guard
Specifications
CPU | 1. 11th Generation IntelÆ Coreô i9 processors / IntelÆ Coreô i7 processors / IntelÆ Coreô i5 processors |
Chipset | 1. IntelÆ Z590 Express Chipset |
Memory | 1. 11th Generation IntelÆ Coreô i9/i7/i5 processors: |
Support for DDR4 5333(O.C.) / DDR4 5133(O.C.) / DDR4 5000(O.C.) / 4933(O.C.) / 4800(O.C.) / 4700(O.C.) / 4600(O.C.) / 4500(O.C.) / 4400(O.C.) / 4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz | |
2. 10th Generation IntelÆ Coreô i9/i7 processors: | |
Support for DDR4 2933/2666/2400/2133 MHz memory modules | |
3. 10th Generation IntelÆ Coreô i5/i3/PentiumÆ/CeleronÆ processors: | |
Support for DDR4 2666/2400/2133 MHz memory modules | |
4. 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory | |
5. Dual channel memory architecture | |
6. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) | |
7. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
8. Support for Extreme Memory Profile (XMP) memory modules | |
Onboard Graphics | Integrated Graphics Processor-IntelÆ HD Graphics support: |
1. 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz | |
* Support for DisplayPort 1.2 version and HDCP 2.3 | |
(Graphics specifications may vary depending on CPU support.) | |
Audio | 1. RealtekÆ audio CODEC |
2. High Definition Audio | |
3. 2/4/5.1/7.1-channel | |
* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software. | |
4. Support for S/PDIF Out | |
LAN | 1. RealtekÆ 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit) |
Expansion Slots | 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. | |
(The PCIEX16 slot conforms to PCI Express 4.0 standard.)(Note) | |
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4) | |
3. 2 x PCI Express x1 slots | |
(The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.) | |
Multi-Graphics Technology | 1. Support for AMD Quad-GPU CrossFireô and 2-Way AMD CrossFireô technologies |
Storage Interface | CPU: |
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4 SSD support) (M2P_CPU)(Note) | |
Chipset: | |
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB) | |
2. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 3.0 x4/x2 SSD support) (M2M_SB) | |
5 x SATA 6Gb/s connectors | |
Support for RAID 0, RAID 1, RAID 5, and RAID 10 | |
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors. | |
IntelÆ Optaneô Memory Ready | |
USB | Chipset: |
1. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
2. 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) | |
3. 1 x USB Type-CÆ port with USB 3.2 Gen 1 support, available through the internal USB header | |
Chipset+2 USB 2.0 Hubs: | |
1. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) | |
Internal I/O Connectors | 1. 1 x 24-pin ATX main power connector |
2. 1 x 8-pin ATX 12V power connector | |
3. 1 x 4-pin ATX 12V power connector | |
4. 1 x CPU fan header | |
5. 4 x system fan headers | |
6. 2 x addressable LED strip headers | |
7. 2 x RGB LED strip headers | |
8. 1 x Q-Flash Plus button | |
9. 5 x SATA 6Gb/s connectors | |
10. 3 x M.2 Socket 3 connectors | |
11. 1 x front panel header | |
12. 1 x front panel audio header | |
13. 1 x S/PDIF Out header | |
14. 1 x USB 3.2 Gen 1 header | |
15. 1 x USB Type-CÆ header, with USB 3.2 Gen 1 support | |
16. 2 x USB 2.0/1.1 headers | |
17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) | |
18. 2 x Thunderboltô add-in card connectors | |
19. 1 x serial port header | |
20. 1 x Clear CMOS jumper | |
Back Panel Connectors | 1. 1 x PS/2 keyboard/mouse port |
2. 1 x DisplayPort | |
3. 2 x USB 3.2 Gen 2 Type-A ports (red) | |
4. 4 x USB 3.2 Gen 1 ports | |
5. 2 x USB 2.0/1.1 ports | |
6. 1 x RJ-45 port | |
7. 3 x audio jacks | |
I/O Controller | 1. iTEÆ I/O Controller Chip |
H/W Monitoring | 1. Voltage detection |
2. Temperature detection | |
3. Fan speed detection | |
4. Fan fail warning | |
5. Fan speed control | |
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. | |
BIOS | 1. 1 x 256 Mbit flash |
2. Use of licensed AMI UEFI BIOS | |
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
Unique Features | 1. Support for APP Center |
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. | |
@BIOS | |
EasyTune | |
Fast Boot | |
Game Boost | |
ON/OFF Charge | |
RGB Fusion | |
Smart Backup | |
System Information Viewer | |
2. Support for Q-Flash Plus | |
3. Support for Q-Flash | |
4. Support for Xpress Install | |
Bundled Software | 1. NortonÆ Internet Security (OEM version) |
2. RealtekÆ 8125 Gaming LAN Bandwidth Control Utility | |
Operating System | 1. Support for Windows 10 64-bit |
Form Factor | 1. ATX Form Factor; 30.5cm x 24.4cm |
Shipping & Return
Shipping Policy
1. General Information
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
2. Shipping Rates & Delivery Estimates
Shipping charges for your order will be calculated and displayed at checkout. Delivery delays can occasionally occur.
- Standard Shipping: 3-5 business days
3. Shipment Confirmation & Order Tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
4. Damages
Vishal Peripherals is liable for any products damaged or lost during shipping. If you received your order damaged, please take the video of unboxing and share through mail at support1@vishalperipherals.com.
5. Returns Policy
Our Return & Refund policy provides detailed information about options and procedures for returning your order. Please refer to our Returns Policy page for more information.
Wishlist
Wishlist is empty.