Zoom
Description
Specifications
CPU | 1. LGA1700 socket: Support for 12th Generation IntelÆ Coreô, PentiumÆ Gold and CeleronÆ Processors* |
| 2. L3 cache varies with CPU | |
| * Please refer to "CPU Support List" for more information. | |
Chipset | 1. IntelÆ Z690 Express Chipset |
Memory | 1. Support for DDR5 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MHz memory modules |
| 2. 4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory | |
| 3. Dual channel memory architecture | |
| 4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) | |
| 5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
| 6. Support for Extreme Memory Profile (XMP) memory modules | |
| (Please refer "Memory Support List" for more information.) | |
Onboard Graphics | Integrated Graphics Processor-IntelÆ HD Graphics support: |
| 1. 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz | |
| * Support for DisplayPort 1.2 version and HDCP 2.3 | |
| (Graphics specifications may vary depending on CPU support.) | |
Audio | 1. RealtekÆ ALC1220-VB CODEC |
| * The front panel line out jack supports DSD audio. | |
| 2. ESS ES9118 DAC chip | |
| 3. Support for DTS:XÆ Ultra | |
| 4. High Definition Audio | |
| 5. 2/4/5.1/7.1-channel | |
| 6. Support for S/PDIF Out | |
LAN | 1. MarvellÆ AQtion AQC113C 10GbE LAN chip |
| (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) | |
WIFI Module | Wireless Communication module |
| 1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands | |
| 2. BLUETOOTH 5.2 | |
| 3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate | |
| * Actual data rate may vary depending on environment and equipment. | |
Expansion Slots | 1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. | |
| (The PCIEX16 slot conforms to PCI Express 5.0 standard.) | |
| 2. 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) | |
| * The PCIEX4_1 slot shares bandwidth with the M2C_SB connector. The PCIEX4_1 slot becomes unavailable when a device is installed in the M2C_SB connector. | |
| (The PCIEX4 slots conform to PCI Express 3.0 standard.) | |
Multi-Graphics Technology | 1. Support for AMD Quad-GPU CrossFireô and 2-Way AMD CrossFireô technologies |
Storage Interface | CPU: |
| 1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) | |
| Chipset: | |
| 1. 2 x M.2 connectors (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB) | |
| 2. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe 3.0 x4/x2 SSD support) (M2C_SB) | |
| 3. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) | |
| 4. 6 x SATA 6Gb/s connectors | |
| Support for RAID 0, RAID 1, RAID 5, and RAID 10 | |
| * Refer to "2-8 Internal Connectors," for the installation notices for the PCIEX4_1, M.2, and SATA connectors. | |
| IntelÆ Optaneô Memory Ready | |
| * System acceleration with IntelÆ Optaneô Memory can only be enabled on the M.2 connectors supported by the Chipset. | |
USB | Chipset: |
| 1. 2 x USB Type-CÆ ports, with USB 3.2 Gen 2x2 support | |
| (1 port on the back panel, 1 port available through the internal USB header) | |
| 2. 3 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
| Chipset+USB 3.2 Gen 2 Hub: | |
| 1. 1 x USB Type-CÆ port on the back panel, with USB 3.2 Gen 2 support | |
| 2. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
| Chipset+2 USB 3.2 Gen 1 Hubs: | |
| 1. 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) | |
| Chipset+USB 2.0 Hub: | |
| 1. 4 x USB 2.0/1.1 ports available through the internal USB headers | |
Internal I/O Connectors | 1. 1 x 24-pin ATX main power connector |
| 2. 2 x 8-pin ATX 12V power connectors | |
| 3. 1 x CPU fan header | |
| 4. 1 x water cooling CPU fan header | |
| 5. 4 x system fan headers | |
| 6. 4 x system fan/water cooling pump headers | |
| 7. 2 x addressable LED strip headers | |
| 8. 2 x RGB LED strip headers | |
| 9. 5 x M.2 Socket 3 connectors | |
| 10. 6 x SATA 6Gb/s connectors | |
| 11. 1 x front panel header | |
| 12. 1 x front panel audio header | |
| 13. 1 x USB Type-CÆ header, with USB 3.2 Gen 2x2 support | |
| 14. 2 x USB 3.2 Gen 1 headers | |
| 15. 2 x USB 2.0/1.1 headers | |
| 16. 1 x noise detection header | |
| 17. 2 x Thunderboltô add-in card connectors | |
| 18. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) | |
| 19. 1 x power button | |
| 20. 1 x reset button | |
| 21. 1 x reset jumper | |
| 22. 1 x Clear CMOS jumper | |
| 23. 2 x temperature sensor headers | |
| 24. Voltage Measurement Points | |
Back Panel Connectors | 1. 1 x Q-Flash Plus button |
| 2. 1 x Clear CMOS button | |
| 3. 2 x SMA antenna connectors (2T2R) | |
| 4. 1 x DisplayPort | |
| 5. 1 x USB Type-CÆ port, with USB 3.2 Gen 2 support | |
| 6. 1 x USB Type-CÆ port, with USB 3.2 Gen 2x2 support | |
| 7. 5 x USB 3.2 Gen 2 Type-A ports (red) | |
| 8. 4 x USB 3.2 Gen 1 ports | |
| 9. 1 x RJ-45 port | |
| 10. 1 x optical S/PDIF Out connector | |
| 11. 5 x audio jacks | |
I/O Controller | 1. iTEÆ I/O Controller Chip |
H/W Monitoring | 1. Voltage detection |
| 2. Temperature detection | |
| 3. Fan speed detection | |
| 4. Water cooling flow rate detection | |
| 5. Fan fail warning | |
| 6. Fan speed control | |
| * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. | |
| 7. Noise detection | |
BIOS | 1. 1 x 256 Mbit flash |
| 2. Use of licensed AMI UEFI BIOS | |
| 3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
Unique Features | 1. Support for APP Center |
| * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. | |
| @BIOS | |
| EasyTune | |
| Fast Boot | |
| Game Boost | |
| ON/OFF Charge | |
| RGB Fusion | |
| Smart Backup | |
| System Information Viewer | |
| 2. Support for Q-Flash Plus | |
| 3. Support for Q-Flash | |
| 4. Support for Xpress Install | |
Bundled Software | 1. NortonÆ Internet Security (OEM version) |
| 2. cFosSpeed | |
Operating System | 1. Support for Windows 11 64-bit |
| 2. Support for Windows 10 64-bit | |
Form Factor | 1. E-ATX Form Factor; 30.5cm x 25.9cm |
Shipping & Return
Shipping Policy
1. General Information
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
2. Shipping Rates & Delivery Estimates
Shipping charges for your order will be calculated and displayed at checkout. Delivery delays can occasionally occur.
- Standard Shipping: 3-5 business days
3. Shipment Confirmation & Order Tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
4. Damages
Vishal Peripherals is liable for any products damaged or lost during shipping. If you received your order damaged, please take the video of unboxing and share through mail at support1@vishalperipherals.com.
5. Returns Policy
Our Return & Refund policy provides detailed information about options and procedures for returning your order. Please refer to our Returns Policy page for more information.
Wishlist
Wishlist is empty.
Compare
Shopping cart
