Description
MSI MEG X870E ACE MAX DRACO EPIC EDITION MOTHERBOARD
- 40th Anniversary Edition: Precision printing and a distinctive light-pattern finish create the exceptional textured Draco design.
- Supports AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors
- Supports DDR5 Memory, Dual Channel DDR5 9000+ MT/s (OC)
- Ultra Performance: 18+2+1 Duet Rail Power System, 110A SPS, OC Engine, dual 8-pin CPU power connectors, Core Boost, Memory Boost, 8-layer PCB made by 2oz thickened copper and server-grade level material.
- Frozr Guard: Wavy fin design, Direct Touch Cross Heat-pipe, MOSFET Baseplate, 9W/mK thermal pads, Double-Sided M.2 Shield Frozr and Frozr AI software ensure the utmost performance with low temperature.
- EZ DIY: 64MB BIOS ROM, EZ PCIe Release, EZ Magnetic M.2 Shield Frozr II, EZ M.2 Clip II, EZ Antenna and EZ Conn-Design.
- Ultra Connect: 10G LAN + 5G LAN, Full-speed Wi-Fi 7 Solution and USB4 - The latest solution for professional and multimedia use, delivering secure, stable, and high-speed networking and data transmission.
- Lightning Fast Game Experience: PCIe 5.0 slots, Onboard 5x M.2 Connectors with Lightning Gen 5 Solution, Front USB 20G with 60W USB Power Delivery.
Specifications
| Chipset | AMD X870E |
| CPU | Supports AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors |
| CPU Socket | AM5 |
| Memory | |
| Memory Slots | 4 × DDR5 UDIMM |
| Maximum Memory Capacity | 256GB |
| Memory Speeds | DDR5 9000–5600 MT/s (OC) / 5600–4800 MT/s (JEDEC) |
| Ryzen 9000 Series – 1DPC 1R | Up to 8400+ MT/s |
| Ryzen 9000 Series – 1DPC 2R | Up to 6400+ MT/s |
| Ryzen 9000 Series – 2DPC 1R | Up to 6400+ MT/s |
| Ryzen 9000 Series – 2DPC 2R | Up to 6400+ MT/s |
| Memory Standards | AMD POR Speed and JEDEC Speed |
| Memory Overclocking | Supported |
| AMD EXPO | Supported |
| Memory Channel | Dual-Channel |
| Memory Type | Non-ECC, Unbuffered |
| CUDIMM Support | Supported, Clock Driver Bypass Mode Only |
| DIMM Slot Design | Single-Sided Latches |
| Memory Compatibility Notes | CUDIMM support, POR boot frequency, and maximum memory speed depend on the processor and memory configuration. Some CPUs may require BIOS updates for improved compatibility. |
| Onboard Graphics | |
| HDMI Output | 1 × HDMI 2.1 FRL, Up to 8K at 60Hz |
| USB-C DisplayPort Output | 2 × USB4 Type-C with DisplayPort 1.4 HBR3, Up to 4K at 120Hz |
| Graphics Requirements | Available only with processors featuring integrated graphics. Specifications vary by CPU. |
| Expansion Slots | |
| PCIe x16 Slots | 2 × PCIe x16 |
| PCIe x4 Slots | 1 × PCIe x4 |
| PCI_E1 | PCIe 5.0, Up to x16 (CPU) |
| PCI_E2 | PCIe 5.0, Up to x8 (CPU) |
| PCI_E3 | PCIe 5.0, Up to x4 (CPU) |
| Ryzen 9000 / 7000 PCIe Configuration | PCIe 5.0 x16 / x0 or x8 / x8 |
| Ryzen 8700 / 8600 / 8400 PCIe Configuration | PCIe 4.0 x8 / x0 |
| Ryzen 8500 / 8300 PCIe Configuration | PCIe 4.0 x4 / x0 |
| PCIe Bandwidth Sharing | PCI_E3 and M.2_1 share bandwidth. Installing a device in PCI_E3 reduces M.2_1 to x2. Setting PCI_E3 to x4 in BIOS disables M.2_1. |
| Audio | |
| Audio Codec | Realtek ALC4082 + ESS9219Q Combo DAC/HPA |
| Audio Channels | 7.1-Channel USB High-Performance Audio |
| S/PDIF Output | Supported |
| Front Audio Playback | Up to 32-bit / 384 kHz |
| Storage | |
| M.2 Slots | 5 × M.2 |
| M.2_1 | PCIe 5.0 x4 (CPU), Supports 2280 / 2260 |
| M.2_2 | PCIe 5.0 x4 (CPU), Supports 2280 / 2260 |
| M.2_3 | PCIe 4.0 x4 (Chipset), Supports 22110 / 2280 |
| M.2_4 | PCIe 4.0 x4 (Chipset), Supports 2280 / 2260 |
| M.2_5 | PCIe 4.0 x4 (Chipset), Supports 2280 |
| SATA Ports | 4 × SATA 6Gb/s |
| M.2_1 – Ryzen 9000 / 7000 | Up to PCIe 5.0 x4 |
| M.2_1 – Ryzen 8000 | Up to PCIe 4.0 x4 |
| M.2_2 – Ryzen 9000 / 7000 | Up to PCIe 5.0 x4 |
| M.2_2 – Ryzen 8700 / 8600 / 8400 | Up to PCIe 4.0 x4 |
| M.2_2 – Ryzen 8500 / 8300 | Not Available |
| M.2_1 Bandwidth Sharing | Shares bandwidth with PCI_E3. Runs at x2 when PCI_E3 is occupied. Setting M.2_1 to x4 disables PCI_E3. |
| M.2_2 Bandwidth Sharing | Shares bandwidth with USB 40Gbps Type-C ports. USB bandwidth is reduced when M.2_2 is occupied. Setting M.2_2 to x4 in BIOS disables USB 40Gbps Type-C ports. |
| M.2 Heatsink Restrictions | Refer to the motherboard manual. |
| RAID Support | |
| SATA RAID | RAID 0 / 1 / 10 |
| NVMe RAID | RAID 0 / 1 / 5 / 10 |
| RAID Compatibility Note | RAID 5 / 10 configurations are supported only with Ryzen 9000 / 7000 Series processors. |
| USB Connectivity | |
| Front USB 2.0 | 4 × USB 2.0 |
| Front USB 5Gbps | 4 × USB Type-A |
| Front USB 20Gbps | 1 × USB Type-C |
| Rear USB 10Gbps Type-A | 9 × USB Type-A |
| Rear USB 10Gbps Type-C | 2 × USB Type-C |
| Rear USB 40Gbps Type-C | 2 × USB Type-C |
| USB 40Gbps Compatibility | With Ryzen 8500 / 8300 Series processors, USB 40Gbps Type-C ports operate at PCIe 4.0 x2. |
| USB Bandwidth Sharing | USB 40Gbps Type-C ports share bandwidth with M.2_2. Enabling M.2_2 x4 mode disables the USB 40Gbps Type-C ports. |
| Wired Networking | |
| 10G LAN | 1 × Marvell AQC113CS 10Gbps |
| 5G LAN | 1 × Realtek 8126 5Gbps |
| Wireless Connectivity | |
| Wireless Technology | Wi-Fi 7 |
| Wireless Module | Pre-installed M.2 Key-E Module |
| Wi-Fi Frequency Bands | 2.4GHz / 5GHz / 6GHz |
| Wi-Fi Channel Width | Up to 320MHz |
| Maximum Wi-Fi Speed | Up to 5.8Gbps |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac/ax/be |
| MU-MIMO | TX / RX Supported |
| Bluetooth | Bluetooth 5.4 |
| Additional Wi-Fi Features | MLO, 4KQAM |
| Wireless Compatibility Notes | 6GHz availability depends on country regulations. Wi-Fi 7 and Bluetooth 5.4 support depend on operating system and driver compatibility. |
| Internal I/O Connectors | |
| ATX Power Connector | 1 × ATX_PWR |
| CPU Power Connectors | 2 × CPU_PWR |
| PCIe Power Connector | 1 × PCIE_PWR 8-Pin |
| Front USB-C Quick Charge Connector | 1 × PD_PWR1 |
| CPU Fan Connector | 1 |
| Combo Fan / Pump Connectors | 2 |
| System Fan Connectors | 5 |
| EZ Conn Header | 1 × JAF_2 |
| Front Panel Connectors | 2 × JFP |
| Chassis Intrusion Connector | 1 × JCI |
| Water Flow Connector | 1 |
| Front Audio Connector | 1 × JAUD |
| Thermal Sensor Connectors | 2 × T_SEN |
| Tuning Controller Connector | 1 × JDASH |
| Addressable RGB Connectors | 3 × JARGB_V2 |
| RGB LED Connector | 1 × JRGB |
| TPM Header | 1 × TPM 2.0 Pin Header |
| Voltage Check Points | V-Check Point |
| Direct OC Jumpers | 2 × JBCLK |
| Internal USB 2.0 Support | 4 Ports |
| Internal USB 5Gbps Support | 4 × Type-A Ports |
| Internal USB 20Gbps Support | 1 × Type-C Port |
| LED Features | |
| EZ Digi-Debug LED | 1 |
| EZ Debug LEDs | 4 |
| EZ Memory Detection LED | 1 |
| EZ LED Control Switch | 1 |
| Back Panel Ports & Controls | |
| USB 10Gbps Type-A | Available |
| Flash BIOS Button | Available |
| Clear CMOS Button | Available |
| Smart Button | Available |
| 10G LAN Port | 1 |
| 5G LAN Port | 1 |
| Wi-Fi / Bluetooth Antenna Connections | Available |
| HD Audio Connectors | Available |
| HDMI 2.1 Port | 1 |
| USB 40Gbps Type-C | 2 |
| USB 10Gbps Type-C | 2 |
| Optical S/PDIF-Out | 1 |
| Operating System | Windows 11 64-bit |
| PCB Information | |
| Motherboard Form Factor | ATX |
| PCB Dimensions | 243.84 × 304.8 mm |
Shipping & Return
General Information
All orders are processed within 1-3 business days. Orders are not shipped or delivered on weekends or holidays. If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping Rates & Delivery Estimates
Shipping charges for your order will be calculated and displayed at checkout. Delivery delays can occasionally occur.
- Standard Shipping: Delivery typically takes 3–15 business days, depending on the delivery location.
- Delays may occur due to incorrect or incomplete addresses provided by the customer or circumstances beyond our control. Any additional charges or penalties arising from such issues will be borne by the customer.
Shipment Confirmation & Order Tracking
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Damages
Vishal Peripherals is liable for any products damaged or lost during shipping. If you received your order damaged, please take the video of unboxing and share through mail at helpdesk@vishalperipherals.com.
Wishlist
Wishlist is empty.





